Avaya Communication Manager Administrator's Manual page 983

Send Called/Busy/Connected Number
This field appears only if the
Type field is isdn. Specifies if the connected party's number is sent on incoming or tandemed ISDN
calls. Valid entries are y, n, or r (restricted). If set to y, the ISDN Numbering - Public/Unknown Format
screen is accessed to construct the actual number sent, or the ISDN Numbering-Private screen (based on
Numbering Format) is used. If set to r, the connected number is sent "presentation restricted."
Send Calling Number
Specifies whether the calling party's number is sent on outgoing or tandemed ISDN calls. Valid entries
are y, n, or r (restricted). If y is entered, the ISDN Numbering - Public/Unknown Format screen is
accessed to construct the actual number to be sent, or the ISDN Numbering-Private screen (based on the
Numbering Format
NOTE:
The ISDN Numbering - Public/Unknown Format screen can override the
Number
Send Codeset 6/7 LAI IE?
Specifies whether the ISDN trunk should transmit information in Codeset 6/7. If the UUI IE Treatment
field is shared, then this field should be n. Otherwise, the same information will be sent twice and may
exceed the message size. Default is y for pre-DEFINITY 6.3 compatibility.
Send Connected Number
Appears if the
QSIG Value-Added
party's number is sent on incoming or tandemed ISDN calls. Valid entries are y, n, or r (restricted). If y is
entered, the ISDN Numbering - Public/Unknown Format screen is accessed to construct the actual
number sent, or the ISDN Numbering-Private screen (based on the
the value is r, the connected number is sent "presentation restricted."
NOTE:
The AT&T Switched Network Protocol does not support restricted displays of connected
numbers. Therefore, if you administer the 1a country-protocol/protocol-version
combination on the DS1 screen, you should not administer the
field to r (restricted) on the ISDN Trunk Group screen, as this causes display problems.
NOTE:
The ISDN Numbering - Public/Unknown Format screen overrides the
Number
Administrator's Guide for Avaya Communication Manager
November 2003
QSIG Value-Added
field) is used. If the value is r, the calling number is sent "presentation restricted."
field entry for any administrable block of extensions.
field on the Trunk Group screen is n. Specifies if the connected
field entry for any administrable block of extensions.
field on the Trunk Group screen is y and the
Numbering Format
Screen Reference
ISDN Trunk Group
Group
Send Calling
field) is used. If
Send Connected Number
Send Connected
983