Avaya Communication Manager Administrator's Manual page 1120

Screen Reference
Remote Access
Permanently Disable
Reactivation of remote access to the interface requires Avaya Services intervention.
Valid entries
y/n
Remote Access Dial Tone
Set this field to n for maximum security. This field appears when the Authorization Code Required field
is set to y.
Valid entries
y/n
Remote Access Extension
The remote access extension is used as if it was a DID extension. Only one DID extension can be
assigned as the remote access extension. Calls to that number are treated the same as calls on the remote
access trunk.
When a trunk group is dedicated to Remote Access, the remote access extension number is administered
on the trunk group's incoming destination field.
Valid entries
Extension
number
TN
Valid entries
1 to 20 (DEFINITY
CSI, SI)
1 to 100 (DEFINITY
R, S8300 Media
Server, S8700
IP-Connect, S8700
Multi-Connect))
1120
Usage
Enter y to permanently block remote access to the administration
interface.
Usage
Enter n so that there is no Remote Access Dial Tone prompt.
Usage
Enter the extension number for Remote Access associated with each
trunk that supports the Remote Access feature. You cannot assign a
Vector Directory Number (VDN) extension as the remote access
extension.
May be blank if no barrier codes.
Usage
Enter the appropriate Tenant Partition number.
Administrator's Guide for Avaya Communication Manager
November 2003