Message Waiting Indication - Avaya Communication Manager Administrator's Manual

Feature Reference
Extension to Cellular and Off-PBX Stations (OPS)
Extension to Cellular/OPS with office caller ID
calling another Extension to Cellular/OPS
user
Incoming calls from other Extension to Cellular/OPS users are internal calls if office caller ID is enabled
for the station associated with the cell phone.
•
When an Extension to Cellular/OPS user has the
Extension to Cellular/OPS calls are delivered.
•
When an Extension to Cellular/OPS user has the
calls from other Extension to Cellular/OPS users are not delivered.
Feature access codes (FAC)
A user can activate Communication Manager features through feature access codes (FAC). A user can
access a FAC by one of these three methods:
•
dialing the telecommuter number
•
dialing the remote access number
•
dialing the "Select Idle" FNE
After hearing dial tone, the user enters the FAC.
Feature name extensions (FNE)
When Extension to Cellular/OPS is enabled, a user can activate a Communication Manager feature
through dialing a feature name extension (FNE) from their cell phone or SIP phone. Feature name
extensions correspond to a direct inward dialing (DID) number for each feature. Each FNE must match
your dial plan, and are administered system-wide.

Message waiting indication

The cell phones cannot receive any screen of message waiting indication directly from the Avaya server
running Communication Manager.
"Notify me" under Unified Messenger for
MS Exchange
Users with access to the "notify me" feature of Unified Messenger
(Version 4.0 or later), are notified of messages in the corporate voice mailbox through the cell phone's
display. For more information on using this feature, see "Setting Notify Me" in the Unified Messenger
Telephone User Interface Online Guide, accessed through http://www.avaya.com/support.
NOTE:
The user's cell phone must support text messaging to use this feature.
1522
Calls Allowed
Calls Allowed
Administrator's Guide for Avaya Communication Manager
field set to internal or all, the
field set to external or none, then
® ®
for Microsoft Exchange
November 2003