Avaya Communication Manager Administrator's Manual page 959

Valid entries
DAPI
DLG
PMS
PMS_JOURNAL
PMS_LOG
SAT
SYS_PRINT
IP Services screen (Session Layer Timers
page)
Use this screen to enable reliable protocol for TCP/IP links, and to establish other session-layer
parameters. This screen only appears if you enter CDR1, CDR2, PMS_JOURNAL, or PMS_LOG in the
Service Type field on page 1 or 2.
Figure 219: IP Services screen (Session Layer Timer page)
change ip-services
Service
Type
CDR1
Administrator's Guide for Avaya Communication Manager
November 2003
Usage
Available only on DEFINITY R, CSI, SI, S8300 Media
Server, S8700 IP-Connect, S8700 Multi-Connect.
For S8300 Media Server and S8100 Media Server only.
Can be entered only if, on the System-Parameters
Customer-Options screen, the
Gateway field is y.
Use this service type for co-resident DEFINITY LAN
Gateway. For more information, see the Avaya
MultiVantage™ CallVisor® ASAI Technical
Reference.
Use this to connect the PMS journal printer over a
TCP/IP link.
Use this to connect the PMS log printer over a TCP/IP
link.
System administration terminal. Not available on
S8100 Media Server with a CMC1.
Use this to connect the system printer over a TCP/IP
link.
SESSION LAYER TIMERS
Reliable Packet Resp
Protocol Timer
y 3
Co-Res DEFINITY LAN
NOTE:
If DLG is selected, another screen
displays. See DLG Administration
page 777.
Session Connect SPDU
Message Cntr Cntr
1
Screen Reference
IP Routing
on
Page 3 of 3
Connectivity
Timer
1 1
959