Avaya Communication Manager Administrator's Manual page 1260

Screen Reference
Trunk Group
CDR Reports
Valid entries
y
n
r (ring-intvl)
NOTE:
For ISDN trunk groups, the
DIOD, FX, and WATS trunk groups, the
CESID I Digits Sent
For emergency 911 service, Communication Manager may send Caller's Emergency Service
Identification (CESID) information to the central office or E911 tandem server/switch. This digit string is
part of the E911 signaling protocol. This field appears when Group Type is cama.
Valid entries
1 to 3 digits
1260
Usage
All outgoing calls on this trunk group will generate call detail
records. If the Record Outgoing Calls Only
System Parameters screen is n, then incoming calls on this trunk
group will also generate call detail records.
Calls over this trunk group will not generate call detail records.
CDR records will be generated for both incoming and outgoing
calls. In addition, the following ringing interval CDR records are
generated:
•
Abandoned calls: The system creates a record with a
condition code of "H," indicating the time until the call was
abandoned.
•
Answered calls: The system creates a record with a
condition code of "G," indicating the interval from start of
ring to answer.
•
Calls to busy stations: The system creates a record with a
condition code of "I," indicating a recorded interval of 0.
Charge Advice
Usage
Determine the correct entry for this field by talking to your E911
provider.
Administrator's Guide for Avaya Communication Manager
field on the CDR
field affects CDR information. For CO,
Analog PPM field affects CDR information.
November 2003