Avaya Communication Manager Administrator's Manual page 1078

Screen Reference
Multifrequency-Signaling-Related Parameters
ANI Prefix
This field appears only when
Valid
entries
1 to 6 digits
or blank
Backward Cycle Timer (sec)
Appears when the
Valid
entries
1 to 255
Collect All Digits Before Seizure
Appears when the
Valid entries
y
n
Convert First Digit End-of-Dial To
Appears when the
Valid
entries
0 to 9, #, or
blank
1078
Outgoing Call Type
Usage
Enter the prefix to apply to an extension when ANI is sent to the CO.
Incoming Call Type field is mfe.
Usage
Enter the number of seconds to wait to send the check frequency after
receiving an MFE signal.
Outgoing Call Type is group-ii-mfc or mfe.
Usage
The system collects all the digits before seizing the trunk and the
field on the AAR and ARS Digit Conversion Table does
ANI Req
not apply.
Enter n to control ANI collection via the ARS screens.
Private Group II Permissions and Public Interworking
Usage
Enter the digit used when the incoming initial end-of-ani or
end-of-dial MF signal is converted on a per-switch basis.
Administrator's Guide for Avaya Communication Manager
is group-ii-mfc or mfe.
field is y.
November 2003