Avaya Communication Manager Administrator's Manual page 1005

Cntry/Peer Protocol
Tells call processing software which ISDN protocol standard is applied.
Valid entries
1 to 25
etsi
QSIG
blank
Interface
Valid entries
network
peer-master
Side
Valid entries
a
b
Field descriptions for page 2
NOTE:
If administering a TN2185 circuit pack, 8 ports appear; otherwise, 12 ports appear.
Administrator's Guide for Avaya Communication Manager
November 2003
Usage
When this field is 10, 12, or 13, the
equivalent to b on the DS1 Circuit Pack screen.
When this field is etsi, the Protocol Version
b on the DS1 Circuit Pack screen.
When the field is peer-master, this field must be QSIG.
Interface
You cannot leave this field blank if the
valid, non-blank value.
Usage
Tells call processing software whether a particular port is
connected to a user/network or a peer interface. These entries are
valid for the TN556B. You can enter peer-master only if the QSIG
Basic Call Setup feature is enabled
Usage
Determines how glare conditions are handled when Interface field
is peer-slave. This field is not administrable when the Interface
field is network.
ISDN-BRI Trunk Circuit Pack
field is
Protocol Version
field is equivalent to
Interface field is set to a
Screen Reference
1005