Avaya Communication Manager Administrator's Manual page 847

Field descriptions for page 6
Figure 184: Feature-Related System Parameters screen
change system-parameters features
CONFERENCE/TRANSFER
Transfer Upon Hang-Up? n
Abort Conference Upon Hang-Up? n
No Hold Conference Timeout: 60
ANALOG BUSY AUTO CALLBACK
AUDIX ONE-STEP RECORDING
Apply Ready Indication Tone To Which Parties In The Call? all
Interval For Applying Periodic Alerting Tone (seconds): 15
CONFERENCE/TRANSFER
Abort Conference Upon Hang-Up
Allows DCP, hybrid, IP, wireless, or ISDN-BRI phone users to abort the conference operation when they
hang up.
Valid entries
y/n
Abort Transfer
Stops the transfer operation whenever a user presses a non-idle call appearance button in the middle of
the transfer operation, or when they hang up. If both the
fields are y and you press the transfer button and then dial the complete transfer-to number, hanging up
the phone transfers the call. You must select another non-idle call appearance to abort the transfer. If the
Transfer Upon Hang-Up
ISDN-BRI or wireless phones.
Valid entries
y/n
Administrator's Guide for Avaya Communication Manager
November 2003
FEATURE-RELATED SYSTEM PARAMETERS
Abort Transfer? n
Select Line Appearance Conferencing? n
Without Flash?
Usage
Enter y to change a call placed on soft-hold in the
conference-pending status to hard-held status if the user hangs up.
field is y, hanging up completes the transfer. Requires DCP, Hybrid, IP,
Usage
Enter y to abort the transfer a call by pressing the Transfer button,
dialing the desired extension, and then hanging up or selecting
another non-idle call appearance. The user must press the Transfer
button again to complete the process unless
Hang-up is also set to y.
Feature-Related System Parameters
No Dial Tone Conferencing? n
Announcement:
Voice Mail Hunt Group Ext:
Abort Transfer and Transfer Upon Hang-Up
Transfer Upon
Screen Reference
page 6
Unhold? n
847