Avaya Communication Manager Administrator's Manual page 882

Screen Reference
Hospitality
Client Room Coverage Path Configuration
This indicates whether the server and the
information for guest stations.
Valid entries
act-nopms
act-pms
Controlled Restrictions Configuration
This indicates whether controlled restriction information is being exchanged between the server and the
PMS.
Valid entries
act-nopms
act-pms
Default Coverage Path for Client Rooms
This applies only to stations with a "client room" class of service in the "occupied" mode. This field is
used for transparent or ASCII mode. The value in this field is also used during a translation save as the
coverage path for each station with "client room" class of service.
Valid entries
1 to 9999 or
blank
Forward PMS Message to INTUITY Lodging
This field is used only in ASCII mode.
Valid entries
y
n
882
Property Management System (PMS)
Usage
The message is acknowledged (MESSAGE ACK), but no action is
taken.
If active (act-pms), the server and PMS exchange and accept
coverage path information. This field does not apply to normal
mode. When upgrading from a release that does not support this
feature, the field is set to act-pms if the PMS protocol mode is
administered for transparent or ASCII mode.
Usage
The message is acknowledged (MESSAGE ACK), but no action is
taken.
The server and the PMS exchange and accept controlled restriction
information.
Usage
Enter the coverage path assigned when the server receives a
check-out message for a valid extension or a new check-in.
Usage
PMS-to-INTUITY messages are sent through the server.
PMS-to-INTUITY messages are sent directly to the Avaya
INTUITY Lodging system.
Administrator's Guide for Avaya Communication Manager
exchange coverage path
November 2003