Time Of Day Routing - Avaya Communication Manager Administrator's Manual

•
Site Data
If Terminal Translation Initialization is enabled, a warning message displays when you tab off the
Site Data fields.
If Terminal Translation Initialization is enabled, and you change the Port field on the Station
screen from "x" to a real port number and change the Room, Jack, or Cable fields in the Site Data
section, a warning message displays when you tab off the fields.
•
Terminating Extension Group (TEG)
If any member of the TEG (that was previously an X port as a result of TTI, PSA or telephone
administration) is merged, that member is excluded from all transactions already taking place in
the TEG when that member is merged. The member is able to join in all subsequent calls to the
group.
Related topics
For more information about configuring the TTI system-wide fields, see
Parameters on page 816.
For more information about setting the TTI feature access codes, see

Time of Day Routing

You can use Time of Day Routing to select route patterns for calls according to the time of day and day of
the week. You need to define the route pattern you want to use before you set up time of day routing.
You can route calls based on the least expensive route, and you can deny outgoing long-distance calls
after business hours to help prevent toll fraud. You can use partition groups to assign different time of day
route plans for different groups of users.
Automatic Alternate Routing (AAR) or Automatic Route Selection (ARS) must be administered on
Communication Manager before you use Time of Day Routing. Time of Day Routing applies to all AAR
or ARS outgoing calls and trunks used for call forwarding to external numbers.
Interactions
•
Distributed Communications System (DCS)
Be careful when you make Time of Day Routing assignments in a DCS environment. The user's
COR Time of Day Plan Number determines whether or not the call is routed to a DCS trunk
group. The call loses feature transparency if it is not routed to a DCS trunk group.
When a call routes over a DCS trunk, the media server at the far end routes the call according to
the COR Time of Day Plan Number of the incoming trunk.
•
Remote Access
When remote access is used and an authorization code or barrier code is dialed for an AAR or
ARS call, the COR Time of Day Plan Number of the barrier code or authorization code is used to
route the call.
Administrator's Guide for Avaya Communication Manager
November 2003
Feature Reference
Time of Day Routing
Feature-Related System
Feature Access Code on page 801.
1725