Avaya Communication Manager Administrator's Manual page 939

IP Audio Hairpinning
Allows IP endpoints to be connected through the IP circuit pack in the server.
Valid entries
y/n
Location
Specifies the location of the IP network region allowing correct date and time information and trunk
routing based on IP network region.
Valid entries
1-44
1-250
blank
RTCP Reporting Enabled
Valid entries
y/n
UDP Port Range
UDP Port Range Min
Specifies the minimum range of the UDP port number used for audio transport.
Valid entries
2048-3028
Administrator's Guide for Avaya Communication Manager
November 2003
Usage
Enter y to allow IP endpoints to be connected through the media
server's IP circuit pack in IP format, without first going through the
Avaya DEFINITY TDM bus.
Usage
(For DEFINITY R, CSI, SI only.) Enter the number for the
location for the IP network region. The IP endpoint uses this as
its location number. This applies to IP telephones and softphones.
(For Avaya S8300 Media Server, Avaya S8700 Multi-Connect,
and Avaya S8700 IP-Connect only.) Enter the number for the
location for the IP network region. The IP endpoint uses this as
its location number. This applies to IP telephones and softphones.
The location is obtained from the cabinet containing the CLAN
or the media gateway that the endpoint registered with.
Usage
Specifies whether you want to enable RTCP reporting. If this
field is set to y, then the RTCP Monitor Server Parameters
fields appear.
Usage
Enter the lowest UDP port number to be used for audio
transport.
Screen Reference
IP Network Region
939