Avaya TANDBERG 150 MXP Installation Instructions Manual
  1. Manuals
  2. Brands
  3. Avaya Manuals
  4. VoIP
  5. Tandberg 150 MXP
  6. Installation instructions manual
Avaya TANDBERG 150 MXP Installation Instructions Manual

Avaya TANDBERG 150 MXP Installation Instructions Manual

Hide thumbs Also See for TANDBERG 150 MXP:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
Installation Instructions for the TANDBERG 150 MXP -
Issue 1.0
These Installation Instructions detail steps for installing TANDBERG 150 MXP (T150) in the
Avaya H.323 environment. This document is intended for use by Avaya service personnel.
Procedures pertaining to the installation, initial configuration and troubleshooting of the T150
are provided. References to source TANDBERG documentation are provided as warranted for
additional detailed information in these areas. The information provided is relevant to the L5
software release of T150 software configured for CM4.0.
Issue 1.0
1/10/2008
Abstract
2008 Avaya Inc. All Rights Reserved.
1 of 13

Advertisement

Table of Contents
loading

Related Manuals for Avaya TANDBERG 150 MXP

Summary of Contents for Avaya TANDBERG 150 MXP

  • Page 1 Issue 1.0 Abstract These Installation Instructions detail steps for installing TANDBERG 150 MXP (T150) in the Avaya H.323 environment. This document is intended for use by Avaya service personnel. Procedures pertaining to the installation, initial configuration and troubleshooting of the T150 are provided.

  • Page 2: Table Of Contents

    Manually Assign an IP Address..................11 4.2. Configure the Tandberg Centric 150 MXP..............12 Optional Features Settings ....................13 5.1. Date and Time Settings....................13 Support..........................13 References..........................13 Issue 1.0 2008 Avaya Inc. All Rights Reserved. 2 of 13 1/10/2008...

  • Page 3: Introduction

    1. Introduction This document details installation instructions for the TANDBERG 150 MXP (T150). The T150 is generally used as a personal, desktop videoconferencing endpoint and supports the H.323 protocol. L5 software is required for this offer. The sample configuration presented in this document describes a typical single CM configuration in a typical LAN environment with direct 100Mbps or greater connectivity to all devices and.

  • Page 4: Configure Connectivity

    Maximum Number of Expanded Meet-me Conference Ports: 0 (NOTE: You must logoff & login to effect the permission changes.) 2.2. Configure Connectivity This section describes the steps for configuring connectivity between the Tandberg and Avaya endpoints with Avaya Communication Manager. Step Description 2.2.1...
  • Page 5 Redundancy relay Modem TDD/TTY Clear-channel Note: See Avaya Video telephony Solution R3 Networking Guide for recommendations on determining the LAN maximum call rate and for more details on priority video. [8] Step Description 2.2.3 Issue the command “change ip-network-region <n>”, where n is the number of an available IP network region, and administer settings as displayed.
  • Page 6 1 by entering the IP codec set provisioned in Step 2.2.1 in the codec set field as displayed. For this sample configuration; the C-LAN, and all Avaya IP endpoints, including Avaya IP Softphone are assigned to IP network region 1, and the Tandberg endpoints are assigned to IP network region 100 (see Step 2.2.6).

  • Page 7: Configure An H.323 Station To Support The Tandberg Centric 150 Mxp

    Extension 192.168.12 .50 192.168.12 .59 2.3. Configure an H.323 Station to Support the Tandberg Centric 150 This section describes the steps for configuring an H.323 station on Avaya Communication Manager to support the Tandberg Centric 150 MXP. Step Description 2.3.1 Issue the command “add station <n>”, where n is the extension of an available station, and...

  • Page 8: Tandberg System Connections

    Administrator Settings menu on the T150. Serial number, hardware revision, and MAC address are printed on labels applied to the bottom of the unit as shown Figure 4. Figure 1 – Front View of TANDBERG 150 MXP Issue 1.0 2008 Avaya Inc. All Rights Reserved.
  • Page 9 Figure 2 – Keypad of TANDBERG 150 MXP Figure 3 – Back/Bottom View of TANDBERG 150 MXP Issue 1.0 2008 Avaya Inc. All Rights Reserved. 9 of 13 1/10/2008...

  • Page 10: Tandberg Configuration

    Figure 4 - Bottom View of TANDBERG 150 MXP 4. Tandberg Configuration This section describes the steps for configuring the Tandberg endpoints. The configuration of the Tandberg endpoints may be administered via the keypad of the Tandberg endpoint or the Command Line Interface (CLI).

  • Page 11: Configure The Tandberg Centric 150 Mxp

    150 MXP is administered with IP network parameters, and has IP network connectivity with the CLAN on Avaya Communication Manager. It should be noted that since the Tandberg Centric 150 MXP does not support the DHCP Option 242 message, the gatekeeper must be statically configured on the Tandberg Centric 150 MXP.

  • Page 12: Optional Features Settings

    5. Optional Features Settings There are many optional features that can be configured on the phone. Please refer to Tandberg 150 MXP User Guide [1] and Tandberg 150 MXP Administrator’s Guide [2] for configuration instructions. 5.1. Date and Time Settings NTP is used to display local clock and to tag missed calls with date and time.
  • Page 13 [6] “Application Notes for Tandberg, Polycom and Avaya Video Endpoitns with Avaya Communication Manager Utilizing H.323 Signaling – Issue 1.0” [7] “Job Aid for the Tandberg 150 MXP”, Issue 1.0 [8] “Avaya Video telephony Networking Guide R3” http://support.avaya.com/elmodocs2/video_telephony/16_601423_1.pdf Issue 1.0 2008 Avaya Inc.

Table of Contents