Avaya Communication Manager Administrator's Manual page 852

Screen Reference
Feature-Related System Parameters
MWI - Number of Digits Per Voice Mail
Subscriber
Appears only if the
System-Parameters Customer-Options screen is y. This field provides an indication of the number of
digits per AUDIX subscriber.
NOTE:
For QSIG-MWI only. These routing digits and inserted digits must screen a digit string
that, when analyzed and processed, routes to a Signaling Group supporting QSIG-TSCs.
Once a QSIG TSC is established (from a message- center server/switch to a served-user
switch), then every lamp update message places the
Message Waiting Indication Subscriber Number Prefixes screen) in front of the AUDIX
subscriber number to screen a complete QSIG network number for the served user.
NOTE:
For Feature Plus MWI only. The routing digits and inserted digits must screen a digit
string that routes over an SSF trunk to the Feature Plus extension on the remote (served
user) switch. The
Valid entries
3 to 7
National CPN Prefix
Allows you to apply prefixes to national calling numbers for display at receiving phones. This is useful
for those phones that use or implement call back features based on incoming call numbers. When an
ISDN-PRI call arrives, the incoming call setup is analyzed for: (1) whether the Type of Address (TOA) is
national or international, and (2) whether the Numbering Plan Identifier (NPI) is Unknown or
ISDN/Telephony. This administered prefix is applied to national calls. Prefixing applies to any
subsequent display on the same server when the call is transferred, covered, or forwarded. The same
prefixing applies to outgoing ISDN-PRI calls when the connected number information is returned and
meets the same TOA and NPI criteria. The prefix plus the calling/connected number digit string is limited
to 15 digits, with truncation occurring at the least significant digits.
Valid entries
1 to 5 digits, 0
through 9, * and
# or blank
852
Basic Supplementary Services
Inserted Digits
Usage
Enter a value that corresponds to the digit string length of
subscribers translated in the Message Center entity. For instance, if
the Message Center entity is AUDIX, the value in this field must
match the value of the
Extension Length
Interface Administration screen of AUDIX.
Usage
Enter a number that allows you to apply prefixes to national calling
numbers for display.
Administrator's Guide for Avaya Communication Manager
field or the
ISDN Feature Plus
Inserted Digits
field must include the Feature Plus extension.
field on the Switch
field on the
field (from the
November 2003