Avaya Communication Manager Administrator's Manual page 822

Screen Reference
Feature-Related System Parameters
Self Station Display Enabled
Use this field to control the use of the inspect button for digital display phones.
S elf Station Display
phone. There are two methods: (1) enter a feature access code (FAC), and (2) use the inspect button. In
either case, the display shows the primary extension associated with the phone where the FAC or normal
or exit button is entered. In the case of the FAC, the display continues until a display-altering event
occurs (for instance, going on-hook or receiving an incoming call). In the case of the inspect button, the
display continues until the user presses the normal or exit button or until a display-altering event occurs.
Valid entries
y
n
Trunk-to-Trunk Transfer
Regulations in some countries control the settings for this field. See your Avaya representative for
assistance.
Valid
entries
all
restricted
none
822
allows a user to display the primary extension associated with a digital display
Usage
The primary extension does display when the inspect button is
pressed.
The extension does not display when the inspect button is pressed.
Usage
Enter all to enable all trunk-to-trunk transfers. This allows telephone
users to set up trunk-to-trunk transfer, go on-hook without
disconnecting the call, and forward the call to a remote location.
Enter restricted (restricted public) to restrict all public trunks (CO,
WATS, FX, CPE, DID, and DIOD).
Enter none to restrict all trunks (except CAS and DCS) from being
transferred.
Administrator's Guide for Avaya Communication Manager
November 2003