Avaya Communication Manager Administrator's Manual page 1283

Valid
entries
e
f
g
Synchronization
This field determines whether the trunk group will use synchronous or asynchronous communications.
This field appears if:
•
the Group Type
•
the Group Type
rbavd, or
•
the Group Type
the ISDN-PRI
Customer-Options screen.
Valid entries
async
sync
TAC
Enter the trunk access code (TAC) that must be dialed to access the trunk group. A different TAC must be
assigned to each trunk group. CDR reports use the TAC to identify each trunk group.
Valid entries
1-4 digit
number
*, #
Administrator's Guide for Avaya Communication Manager
November 2003
Usage
Allows ASAI Flexible Billing.
Allows DCS with rerouting.
field on the Trunk Group screen must be y.
Used for DCS
Feature Plus
ANSI. Available only if, on the System-Parameters
Customer-Options screen, the
field is y.
Used for DCS
Use g protocol for Network Call Transfer. For more information, see
Avaya MultiVantage™ Call Center Software Release 11 — Network
Call Redirection.
field is dmi-bos or isdn, or
field is access, co, fx, tandem, tie, or wats and the
field is access, co, fx, tandem, tie, or wats, the
field or the ISDN-BRI Trunks
Usage
Do not change this field without the assistance of Avaya or your
network service provider.
Usage
Enter any number that fits the format for trunk access codes or dial
access codes defined in your dial plan.
* and # may be used as the first character in a TAC.
must be y, and the
DCS with Rerouting
or field is y or the
ISDN-PRI ISDN-BRI
Comm Type
field is y on the System-Parameters
Screen Reference
Trunk Group
Comm Type field is avd or
field is data, and
1283