Avaya Communication Manager Administrator's Manual page 1469

•
PPM
Periodic Pulse Metering (PPM) contains pulse counts transmitted over the trunk line from the
serving CO. These are used to determine call charges.
•
Resource Flag (res_flag) — 1 digit
Indicates whether the call was circuit switched or packet switched, whether a conversion resource
was used, or if the call involved a MASI terminal or trunk.
— 0 — circuit switched, no conversion device used
— 1 — packet switched, no conversion device used
— 2 — circuit switched, conversion device used
— 3 — packet switched, conversion device used
— 8 — MASI call
•
Sec-dur
For customized records only, this field allows you to set the duration field to display seconds
instead of tenths of minutes.
•
Space — up to 40 characters
The ASCII space character separates other CDR fields or fills unused record locations.
•
TSC-Count (tsc_ct)
This is the customized name for Packet Count. See Packet Count.
•
TSC Flag (tsc_flag) — 1 digit
This field describes call records that pertain to temporary signalling connections. When not equal
to 0, this field will indicate the status of the TSC.
presents the TSC Flag encoding.
Table 56: Encoding for TSC flag 1 of 2
Encoding
0
1–3
4
5
6
7
8
Administrator's Guide for Avaya Communication Manager
November 2003
Meaning
Circuit-switched call without TSC requests
Reserved
Call Associated TSC requested and accepted in response to SETUP, no
congestion control (applicable to originating node). Call Associated TSC
received and accepted via SETUP, no congestion control (applicable to
terminating node).
Call Associated TSC received and accepted via SETUP, congestion control
(applicable to terminating node).
Call Associated TSC requested, accepted after SETUP, no congestion control
(applicable to originating node). Call Associated TSC received and accepted
after SETUP, no congestion control (applicable to terminating node).
Call Associated TSC received and accepted after SETUP, congestion control
(applicable to terminating node).
Call Associated TSC requested, rejected (rejection came from outside the
local switch).
Table 56, Encoding for TSC flag,
Feature Reference
Call detail recording
on page 1469
1 of 2
1469