Avaya Communication Manager Administrator's Manual page 1463

Table 53: Condition codes 2 of 2
Condition
Codes
G
H
I
J
K
M
T
If the trunk-group CDR Reports field is set to ring , CDR records the ring time to answer or
abandon for incoming calls originated by the trunk group. In addition, CDR indicates if the
incoming destination is busy. This record is separate from the normal call duration record printed
for an answered call. This information is indicated by the condition code.
When an incoming call originated by a trunk group with this option set is terminated to an internal
destination, the call is tracked from the time ringing feedback is given to the originator. If the call
is answered, a CDR record is printed with the condition code "G" and the duration reflects the
time between the start of ringing and the answer of the call. If the call is abandoned before being
answered, the system prints a record with the condition code "H" and the duration reflects the
time between the start of ringing and the time the call was abandoned. If the destination is busy, a
CDR record is printed with the condition code "I" and a duration of 0.
•
Condition Code overrides
If two condition codes apply to the same call, one code overrides the other. The following matrix,
Table 54, Condition code override matrix,
assume that condition codes 7 and A apply to the same call. To find the condition code that
overrides, look at the point where row 7 intersects column A (or where row A intersects column
7). In this case, condition code 7 overrides.
Administrator's Guide for Avaya Communication Manager
November 2003
Description
Indicates a call terminating to a ringing station.
Indicates that a ringing call has been abandoned.
Indicates a call terminated to a busy station.
Indicates an incoming trunk call that is a new connection using ANF-PR (Additional
Network Feature–Path Replacement, see QSIG) or DCS with Rerouting.
Indicates an outgoing trunk call that is a new connection using ANF-PR (Additional
Network Feature–Path Replacement, see QSIG) or DCS with Rerouting.
Indicates an outgoing trunk call was automatically disconnected by timer.
Identifies CDR records of calls where the following conditions exist:
•
The Condition Code 'T' for Redirected Calls? field on the CDR System
Parameters screen is set to y
•
The incoming trunk group is DID
The incoming call has been automatically redirected off of the server running
Communication Manager
on page 1464, defines the overrides. To use this matrix,
Feature Reference
Call detail recording
2 of 2
1463