Avaya Communication Manager Administrator's Manual page 1184

Screen Reference
Station
R Balance Network
Valid entries
y
n
Recall Rotary Digit
This field only appears if type is 500 or 2500.
Valid entries
y/n
Redirect Notification
Valid entries
y/n
Remote Office Phone
Valid entries
y/n
1184
Usage
Enter y to select the R Balance Capacitor network. In all other cases
except for those listed under n, enter y.
Enter n to select the standard resistor capacitor network. You must
complete this field if Off-Premise Station is y. Enter n when the
station port circuit is connected to terminal equipment (such as SLC
carriers or impedance compensators) optioned for 600-ohm input
impedance and the distance to the equipment from the system is less
than 3,000 feet.
Usage
Enter y to allow the user of a rotary phone to dial the administered
Recall Rotary Digit to receive recall dial tone. This will enable this
user to perform conference and transfer operations.
You establish the Recall Rotary Digit on the
System Parameters screen.
Usage
Enter y to give a half ring at this phone when calls to this extension
are redirected (via Call Forwarding or Call Coverage).
Enter y if LWC Reception is audix.
Usage
Enter y to use this station as an endpoint in a remote office
configuration.
Administrator's Guide for Avaya Communication Manager
Feature-Related
November 2003