Avaya Communication Manager Administrator's Manual page 1080

Screen Reference
Multifrequency-Signaling-Related Parameters
Incomplete Dial Timer (sec)
Appears when the
Valid
entries
45 to 255
Maintenance Call Type
Appears when the
Valid
entries
1
2
none
Maximum Resent Requests
Valid
entries
1 to 99
1
blank
MF Signaling Intercept Treatment - Incoming
Valid entries
y
n
1080
field is mfe.
Incoming Call Type
Usage
Enter the number of seconds to wait from the start of a call until the
end of the check frequency of the last signal. Communication
Manager drops the call if the time runs out before it receives the check
frequency.
Incoming Call Type field is group-ii-mfc or non-group-ii-mfc.
Usage
The Belgium maintenance sequence is indicated when the CO sends
an MFC maintenance tone.
The Saudi Arabian sequence is indicated when the CO sends an MFC
maintenance tone.
Usage
Enter the threshold number of resend type MFC signals your server
running Communication Manager accepts during an outgoing call.
The call is dropped if one resend signal is received.
An unlimited number of resend requests is allowed.
Usage
Send the group B signal for the intercept to the CO and play
intercept tone on the trunk.
Use normal DID/TIE/ISDN intercept treatment.
Administrator's Guide for Avaya Communication Manager
November 2003