Avaya Communication Manager Administrator's Manual page 1083

Overlap Sending on Link-to-Link Tandem
Calls
Does not appear if the
Manager has this field set to y, and calls are tandeming between media servers or switches, then ANI for
PBX will be sent to the terminating switch if that switch requests ANI before Avaya Communication
Manager receives it from the originating server/switch. The terminating server/switch may request ANI
before the receipt of the last address digit if it is not running Avaya Communication Manager, or if it is
Avaya Communication Manager with the
Valid entries
y/n
Private Group II Permissions and Public
Interworking
Displays when the
field is group-ii-mfc or none.
Call Type
Valid entries
y/n
Received Signal Gain (dB)
Valid
entries
-15 to 3
Administrator's Guide for Avaya Communication Manager
November 2003
Collect All Digits Before Seizure
Request Call Category at Start of Call
Usage
If y, Avaya Communication Manager sends and receives digits one
digit at a time instead of enbloc. (With enbloc, digits are not sent
until the entire group of digits is received).
field is group-ii-mfc or non-group-ii-mfc and the
Incoming Call Type
Usage
If y, then Avaya Communication Manager:
— Sends the category for MFC ANI for the COR of the
originating party for non-private-MFC-trunk to
MFC-private-trunk calls.
— Sends the Group II category received over the incoming
private trunk as the outgoing Group II category on
tandem private MFC calls.
— Applies MFC group II-CPC termination restrictions on
incoming MFC private trunk calls.
— Checks station permissions if you call forward off-net.
Usage
Enter the number for the loss/gain when the MFC port listens to the
trunk port. Communication Manager listens with a range of -5 to -35
and this value moves the range (for example, a value of -5 provides a
range of -10 to -40). This value also applies to Russian MF Shuttle
trunks.
Multifrequency-Signaling-Related Parameters
field is y. When Avaya Communication
field set to y.
Screen Reference
Outgoing
1083