Avaya Communication Manager Administrator's Manual page 1164

Screen Reference
Station
Bridged Call Alerting
If Bridged Call Alerting is n and Per Button Ring Control is n, audible ringing is suppressed for incoming
calls on bridged appearances of another phone's primary extension.
Valid entries
y/n
Building
Enter a valid building location. See
Busy Auto Callback Without Flash
Appears only if, on the Feature-Related System Parameters screen, the
field then defaults to y for all analog phones that allow Analog Automatic Callback.
Valid
entries
y/n
Button Assignments
Enter the abbreviated software name to assign a feature button. For a list of feature buttons, see
Telephone feature Buttons
NOTE:
If you want to use Terminal Translation Initialization (TTI), you must assign a call
appearance (call-appr) to the first button position. TTI needs the button on the first call
appearance to get dial tone.
Cable
You can use this field to identify the cable that connects the phone jack to the system. You also can enter
this information in the Blank column on the Port Assignment Record.
1164
Usage
Enter y to enable audible ringing for TEG, PCOL, bridged
appearances, or Data Extension calls.
Signaling Group screen (page 2)
Usage
Enter y to provide automatic callback for a calling analog station
without flashing the hook.
on page 114.
Administrator's Guide for Avaya Communication Manager
on page 1153 for valid entries.
field is y. This
Without Flash
November 2003