Avaya Communication Manager Administrator's Manual page 1299

Send Calling Number
Specifies whether the calling party's number is sent on outgoing or tandemed ISDN calls. Valid
entries are ,
y n
Format screen is accessed to construct the actual number to be sent, or the ISDN
Numbering-Private screen (based on the
calling number is sent "presentation restricted."
NOTE:
The ISDN Numbering - Public/Unknown Format screen can override the
Number
Send Connected Number
Appears if the
QSIG Value-Added
party's number is sent on incoming or tandemed ISDN calls. Valid entries are y, n, or r (restricted). If y is
entered, the ISDN Numbering - Public/Unknown Format screen is accessed to construct the actual
number sent, or the ISDN Numbering-Private screen (based on the
the value is r, the connected number is sent "presentation restricted."
NOTE:
The AT&T Switched Network Protocol does not support restricted displays of
connected numbers. Therefore, if you administer the 1a
country-protocol/protocol-version combination on the DS1 screen, you should not
administer the
Group screen, as this causes display problems.
NOTE:
The ISDN Numbering - Public/Unknown Format screen overrides the
Connected Number
Send Name
Specifies whether the calling/connected/called/busy party's administered name is sent to the network on
outgoing/incoming calls. Valid entries are y, n, or r (restricted). The value r indicates that the
calling/connected name will be sent by Avaya Communication Manager, but will be marked
"presentation restricted." This value is valid only if the
(national supplementary service), b (for called/busy only) or d for the QSIG Global Networking
Supplementary Service Protocol. When the
Rerouting), only values of y and n are permitted.
NOTE:
If name information is not administered for the calling station or the
connected/called/busy station, the system sends the extension number in place of the
name.
Administrator's Guide for Avaya Communication Manager
November 2003
, or (restricted). If is entered, the ISDN Numbering - Public/Unknown
r y
field entry for any administrable block of extensions.
field on the Trunk Group screen is n. Specifies if the connected
Send Connected Number
field entry for any administrable block of extensions.
field) is used. If the value is
Numbering Format
.
Numbering Format
field to (restricted) on the ISDN Trunk
r
Supplementary Service Protocol
Supplementary Service Protocol
Screen Reference
Trunk Group
, the
r
Send Calling
field) is used. If
Send
field is a
field is e (DCS with
1299