Avaya Communication Manager Administrator's Manual page 1077

Figure 310: Multifrequency-Signaling-Related Parameters
change system-parameters multifrequency-signaling
change multifrequency-signaling
Maintenance Call Type:
Maintenance Call Type:
Test Call Extension:
Interdigit Timer (sec):
Maximum Resend Requests:
Received Signal Gain (dB): Maximum Resend Requests: _
Transmitted Signal Gain (dB): Received Signal Gain (dB): _
Transmitted Signal Gain (dB): -
MF Signaling Intercept Treatment - Incoming? _
MF Signaling Intercept Treatment - Incoming? _
The ANI Prefix
the Outgoing Call Type
If
Collect All Digits Before Seizure
First Digit End-of-ANI
Default ANI
This field appears only when
Valid
entries
2 to 15
blank
Administrator's Guide for Avaya Communication Manager
November 2003
MULTIFREQUENCY-SIGNALING-RELATED SYSTEM PARAMETERS MULTIFREQUENCY-SIGNALING-RELATED SYSTEM PARAMETERS
Incoming Call Type:
Incoming Call Type:
Outgoing Call Type:
Outgoing Call Type:
Request Incoming ANI (non-AAR/ARS)?
Request Incoming ANI (non-AAR/ARS)?
Outgoing Forward Signal Present Timer (sec):
Outgoing Forward Signal Present Timer (sec):
Outgoing Forward Signal Absent Timer (sec):
Outgoing Forward Signal Absent Timer (sec):
Collect All Digits Before Seizure? Collect All Digits Before Seizure?
Overlap Sending on Link-to-Link Tandem Calls? Overlap Sending on Link-to-Link Tandem Calls?
Private Group II Permissions and Public Interworking?
Private Group II Permissions and Public Interworking?
Convert First Digit End-of-ANI To: _
Convert First Digit End-of-ANI To: _
Use COR for All Group II Responses? _
Use COR for Calling Party Category?
Outgoing Shuttle Exchange Cycle Timer (sec):
Use COR for Calling Party Category?
, Default ANI , and Collect All Digits Before Seizure
field is group-ii-mfc or mfe.
is y,
Overlap Sending on Link-to-Link Tandem Calls and Convert
are not displayed.
Outgoing Call Type
Usage
Enter the PBX identification number that is sent to the CO when ANI
is requested (by the CO) on a particular call but is not available, such
as on tandem tie trunk calls.
Use for tandeming. If this field is blank, you must enter a value in the
field.
ANI-Not-Available
Multifrequency-Signaling-Related Parameters
ANI Prefix:
ANI Prefix:
ANI for PBX:
Default ANI:
NEXT ANI DIGIT
NEXT ANI DIGIT
Incoming:
Incoming:
Outgoing:
Outgoing:
Outgoing: ____________ _____
Outgoing: ____________ _____
Group II Called Party Category:
Group II Called Party Category:
fields appear only when the value of
is group-ii-mfc or mfe.
Screen Reference
Page 1 of 4
Page 1 of X
1077