Avaya Communication Manager Administrator's Manual page 797

ESF DATA LINK OPTIONS
Far-end CSU Address
This field, which, appears only if the
Valid entries
a
b
Network Management Protocol
This field appears only if the
Valid entries
tabs
Send ANSI-T1.403 One-Second Performance
Reports
This field selects whether your DS1 circuit pack will send error reports to the far-end server/switch.
These reports are useful for network management, and are sent at 1-second intervals when enabled. This
field appears only if the
integrated channel service unit (CSU).
Valid entries
y/n
INTEGRATED CSU OPTIONS
Receive ALBO (Receive Automatic Line
Build-Out)
This field increases the strength of incoming signals by a fixed amount to compensate for line losses.
Valid entries
26db
36db
Administrator's Guide for Avaya Communication Manager
November 2003
Framing Mode
Usage
Enter b. This field administers the transmit direction address used
for the ESF data link command with both integrated and external
channel service units (CSU).
field is esf.
Framing Mode
Usage
The entry in this field, used only with circuit packs that have an
integrated channel service unit (CSU), allows the data link to be
remotely monitored.
Framing Mode field is esf. It is used only with circuit packs that have an
Usage
Enter n. Consult your Avaya representative if you think you may
want to use these reports.
Usage
To set this field correctly, you should measure the signal loss on this
specific facility. However, you may enter 26db for most
applications. 36db is occasionally appropriate, mainly on campus
networks that don't conform to public telephone network standards.
field is esf.
Screen Reference
DS1 Circuit Pack
797