Avaya Communication Manager Administrator's Manual page 857

Field descriptions for page 9
Figure 187: Feature-Related System Parameters screen
change system-parameters features
Outpulse Without Tone? y
Misoperation Alerting? n
Allow Conference via Flash? y
Vector Disconnect Timer (min): __
Hear Zip Tone Following VOA? y
Intercept Treatment On Failed Trunk Transfers? n
Date Format on 607/2420/4600/6400 Terminals: mm/dd/yy
On-hook Dialing on 607/2420/4600/6400/8400 Terminals? n
ITALIAN DCS PROTOCOL
Italian Protocol Enabled? y
Apply Intercept Locally? _
Allow Conference via Flash
Valid entries
y
n
Charge Display Update Frequency (seconds)
This applies only if you use Advice of Charge or Periodic Pulse Metering with display functions.
Valid entries
10–60 or blank
Administrator's Guide for Avaya Communication Manager
November 2003
FEATURE-RELATED SYSTEM PARAMETERS
Pull Transfer: n
Station Tone Forward Disconnect: silence
Level Of Tone Detection: precise
Charge Display Update Frequency (seconds): 30
Usage
Enter y to allow an analog station to use flash to conference calls
together.
Enter n to prevent this.
Usage
The amount of time (in seconds) between charge-display updates.
Frequent display updates may have considerable performance
impact. If the duration of a call is less than the Charge Display
Update Frequency, the display will not automatically show charge
information. To see charge information for a call, the user must
have a disp-chrg button and must press the button before the call
drops.
Feature-Related System Parameters
Update Transferred Ring Pattern? n
Wait Answer Supervision Timer? n
Repetitive Call Waiting Tone? y
Repetitive Call Waiting Interval (sec): _
Network Feedback During Tone Detection? y
System Updates Time On Station Displays? n
Enforce PNT-to-PNT Restrictions? _
Screen Reference
page 9
857