Time Of Day Routing Plan - Avaya Communication Manager Administrator's Manual

Act Time
Specify the activation time of the coverage path administered in the next CVG PATH field. Enter the
information in 24-hour time format.
Valid entries
00:01 to 23:59
CVG Path
Enter the coverage path number.
Valid entries
1 through 9999
or blank
1 through 999
Time of Day Coverage Table
A display-only field when the screen is accessed using an administration command. Specifies the Time of
Day Coverage Table number. Up to 999 can be administered.

Time of Day Routing Plan

Use this screen to set up Time of Day Routing Plans. You can route AAR and ARS calls based on the
time of day each call is made. You can design up to 8 Time of Day Routing Plans, each scheduled to
change up to 6 times a day for each day in the week.
Match the Time of Day Routing Plan PGN# with the PGN# field on the Partition Routing Table for the
route pattern you want to use.
NOTE:
Automatic Route Selection (ARS)
Time of Day Routing
screen before you can use Time of Day Routing.
Administrator's Guide for Avaya Communication Manager
November 2003
Usage
If there are time gaps in the table, there will be no coverage path in
effect during those periods. The first activation time for a day is set
to 00:00 and cannot be changed. Activation times for a day must be
in ascending order from left to right.
Usage
For the DEFINITY R configurations and S8700 IP-Connect
For the DEFINITY SI configurations
must be enabled on the System-Parameters Customer-Options
or Private Networking , AAR/ARS Partitioning
Screen Reference
Time of Day Routing Plan
, and
1247