Avaya Communication Manager Administrator's Manual page 1293

Glare Handling
This field determines what Communication Manager will do when glare occurs. This field appears when
the Direction field is two-way and the outgoing side of the Trunk Type field is either .../wink or
.../delay.
If you enter control or backoff, and ports for the trunk group are not capable of detecting glare, warnings
are generated. The following circuit packs can detect glare: TN767 (all releases), TN760C (or later
releases), and TN464C (or later releases).
Valid entries
control
backoff
none
Incoming Tone (DTMF) ANI
This field appears only when the Incoming
Number Identification (ANI) are printed on a CDR record, passed to the INTUITY AUDIX and ASAI
interfaces, and displayed on the phone (and on tandem calls if the outgoing trunk requires ANI). Then the
digits are sent to the outgoing trunk.
Valid entries
*ANI*DNIS*
ANI*DNIS*
no
nternal Alert
I
Valid entries
y/n
Long Holding Time (hours)
This field appears only when the ACA Assignment field is y.
Valid entries
0 to 10
Administrator's Guide for Avaya Communication Manager
November 2003
Usage
Communication Manager will seize the trunk and proceed with call
setup. The other switch will find another trunk.
The other server or switch will seize the trunk and proceed with
call setup. Your server/switch will find another trunk.
Dial Type
Usage
If 555-3800 calls extension 81120, the trunk group receives
*55538000*81120*. The phone displays Call from 555-3800.
If 555-3800 calls extension 81120, the trunk group receives
55538000*81120*. The phone displays Call from 555-3800.
Usage
Enter y if internal ringing and coverage will be used for incoming
calls.
Usage
Enter the length of time (in hours) that the system will consider as
being a long holding time. If you enter 0, the system will not
consider long holding calls.
field is tone. Digits received through Automatic
Screen Reference
Trunk Group
1293