Avaya Communication Manager Administrator's Manual page 1280

Screen Reference
Trunk Group
Send Release Ack
This field appears when the
(used for Italian and Hungarian tie trunks).
Valid entries
y/n
Send Name
Specifies whether the calling/connected/called/busy party's administered name is sent to the
network on outgoing/incoming calls. Valid entries are
indicates that the calling/connected name will be sent by Avaya Communication Manager, but
will be marked "presentation restricted." This value is valid only if the
field is
Protocol
Global Networking Supplementary Service Protocol
field is e (DCS with Rerouting), only values of
NOTE:
If name information is not administered for the calling station or the
connected/called/busy station, the system sends the extension number in place of the
name.
Service Type
Indicates the service for which this trunk group is dedicated. The following table provides a listing of
predefined entries. In addition to the Services/Features listed in this table, any user-defined Facility Type
of 0 (feature) or 1 (service) on the Network Facilities screen is allowed.
As many as 10 (for Avaya DEFINITY Server SI or CSI) or 200 (for DEFINITY Server R) ISDN trunk
groups can have this field administered as cbc.
Valid entries
access
accunet
cbc
dmi-mos
i800
inwats
lds
1280
Trunk Signaling Type
Usage
Enter y to send a release acknowledgment in response to a forward
or backward release signal.
(national supplementary service),
a
Usage
A tie trunk giving access to an Electronic Tandem Network.
ACCUNET Switched Digital Service — part of ACI (AT&T
Communications ISDN) phase 2.
Call-by-Call service — provides different dial plans for different
services on an ISDN trunk group. Indicates this trunk group is used
by the Call-By-Call Service Selection feature.
Digital multiplexed interface — message oriented signaling.
International 800 Service — allows a subscriber to receive
international calls without a charge to the call originating party.
INWATS — provides OUTWATS-like pricing and service for
incoming calls.
Long-Distance Service — part of ACI (AT&T Communications
ISDN) phase 2.
Administrator's Guide for Avaya Communication Manager
field is cont or dis and only applies to TN2140 ports
, , or (restricted). The value
y n r
Supplementary Service
(for called/busy only) or
b
. When the
Supplementary Service Protocol
and are permitted.
y n
r
for the
d
QSIG
November 2003