Avaya Communication Manager Administrator's Manual page 1048

Screen Reference
Location Parameters
Outgoing Shuttle Exchange Cycle Timer (sec)
Appears when the
Type field is group-ii-mfc or none on the Multifrequency-Signaling-Related System Parameters
screen. This field applies only to multifrequency signaling calls made from Avaya Communication
Manager.
Valid entries
1 to 25
Upper Bound (msec)
Specifies the upper bound of the flashhook interval. Specifies the upper bound of the station-to-switch
recall signal timing interval in milliseconds. Appears when the
Valid entries
80 to 1250 (in
increments of
10).
Field descriptions for page 2
Figure 299: Loss Plans
change location-parameters
LOSS PLANS
End-to-End total loss (dB) in a n-party conference:
3:_15
1048
field is group-ii-mfc or non-group-ii-mfc and the
Incoming Call Type
Usage
Enter the number of seconds to time an exchange cycle (starts
when the far end requests a digit until Avaya Communication
Manager sends the requested digit).
Usage
A flash of 50 msec to 130 msec is always acceptable from a
2500-type set regardless of the setting of the Upper and Lower
bounds and will be treated as the digit one.
2 PARTY LOSS PLAN: 1
TONE LOSS PLAN: 1
4:_21 5:_26 6:_29
Administrator's Guide for Avaya Communication Manager
Outgoing Call
Flashhook Interval field is y.
Customize? n
Customize? n
Customize? n
November 2003