Avaya Communication Manager Administrator's Manual page 850

Screen Reference
Feature-Related System Parameters
Interval For Applying Periodic Alerting Tone (seconds)
Appears only if the
Valid
entries
0 through 60
Field descriptions for page 7
Figure 185: Feature-Related System Parameters screen
change system-parameters features
ISDN PARAMETERS
Send Non-ISDN Trunk Group Names as Connected Name?
Display Connected Name/Number for ISDN DCS Calls?
Send ISDN Trunk Group Name on Tandem calls?
MWI - Number of Digits Per Voice Mail Subscriber:
Unknown Numbers Considered Internal for AUDIX?
ISDN PARAMETERS
Display Connected Name/Number for ISDN
DCS Calls
Valid entries
y/n
850
Apply Ready Indication Tone To Which Parties In The Call
Usage
Enter a number from zero to 60 for the number of seconds desired
between alerting tones, where zero disables the tone. The default
value is a 15 second interval.
FEATURE-RELATED SYSTEM PARAMETERS
Send Custom Messages Through QSIG?
QSIG TSC Extension:
National CPN Prefix:
International CPN Prefix:
Pass Prefixed CPN to ASAI:
UNSI Calling Name for Outgoing Calls?
Path Replacement with Measurements?
QSIG Path Replacement Extension:
Path Replace While in Queue/Vectoring?
Usage
Enter y to display the connected name/number (if received) for
ISDN DCS calls.
Administrator's Guide for Avaya Communication Manager
field is set to all.
page 7
November 2003