Special Dial Tone - Avaya Communication Manager Administrator's Manual

Short Interdigit Timer (seconds)
Enter a number to limit the time that digit analysis will wait for the next digit when it has predicted that
all the digits have already been collected.
Valid entries
3 through 9

Special Dial Tone

Special dial tone notifies an analog-phone user if certain features are still active when the user goes
off-hook. These features include:
•
Call Forwarding
•
Send All Calls
•
Do Not Disturb
Valid entries
y/n
Station Call Transfer Recall Timer (seconds)
Allows a user-transferred call (station-to-station, a trunk call, or a DCS call) to re-terminate with priority
ringing back to the station user who initiates the transfer operation if the transfer-to party does not answer
the call within the administered Station Call Transfer Recall timer.
Valid entries
through
0 999
Unanswered DID Call Timer (seconds)
Enter number or blank to limit how long a DID call can remain unanswered before routing to the
DID/TIE/ISDN Intercept Treatment feature. This timer interacts with the nonadministrable 50 second
Wait for Answer Supervision Timer (WAST). The WAST timer overrides this field. Thus if this field is
set to a value equal to or greater than 50 seconds, the caller receives intercept tone instead of the normal
attendant or announcement treatment that is given when the Unanswered DID Call Timer expires before
the WAST. If the Unanswered DID Call Timer expires while the DID call is being processed by call
vectoring, the timer is ignored. See
Valid entries
A number between 10 and 1024
blank
Administrator's Guide for Avaya Communication Manager
November 2003
Usage
Usage
Enter y to use the Special Dial Tone. You must have a TN2182
circuit pack.
Usage
Enter the time in seconds before a call redirects back to the station
user who initiated the transfer operation. Enter 0 to disable this
feature.
Wait Answer Supervision Timer
Usage
Disables the timer.
Screen Reference
Feature-Related System Parameters
in this section.
845