Avaya Communication Manager Administrator's Manual page 1662

Feature Reference
Separation of Bearer and Signaling
Attendant features that will work
•
Attendant Direct Extension Selection (DXS) may be used to originate an SBS call using
Uniform Dial Plan (UDP).
•
Attendant Intrusion may be used to intrude on an SBS call.
•
Attendant Recall will work with an SBS call
•
Attendant Return Call and Serial Calling will work with an incoming SBS call.
•
Attendant transfer is applicable to an SBS call.
•
An incoming SBS call can be parked and is subject to Call Park Time-out to the Attendant.
•
An SBS call may be a conference party in an Attendant conference.
•
An SBS call may be directed to an Individual Attendant access number.
•
Inter-PBX Attendant service will work with SBS trunks.
•
Incoming SBS calls will follow Attendant Night Service
•
Incoming SBS calls will hear Recorded Announcements in the Attendant Queue.
•
An incoming SBS call can be answered using Trunk Answer Any Station (TAAS).
•
The Trunk Identification by Attendant feature will identify the SBS trunk group member.
•
An SBS call can be held with Two-Party Hold on Console.
•
Attendant Vectoring can receive and redirect Attendant directed calls over SBS trunks.
Adjunct Switch Applications Interface (ASAI)
Interactions
•
When using Call Classification after Answer, calls should not be routed using SBS, because the
Call Classifier must be on the bearer trunk, and there will be interference from the SBS invoked
DTMF signaling sent on the bearer trunk.
•
ASAI Phantom call, e.g. "DEFINITY Anywhere," may originate or receive an SBS call.
•
ASAI Selective Listening will work on an SBS trunk party on a call.
•
ASAI Send DTMF will work on a connected SBS call.
•
ASAI Single Step Conference can add another station onto a call with an SBS call.
•
ASAI Provided Dial-Ahead Digits will work when the incoming call is an SBS call.
•
Any ASAI user data and/or
will be sent on the SBS signaling call.
•
When an SBS call is received and subsequently tandemed over an SBS trunk, any II Digits
received in the incoming SBS Signaling call SETUP message will be tandemed with the SBS
signaling call.
•
The information provided in response to an ASAI Value Query will indicate whether an SBS
trunk or associated bearer trunk is idle or busy. The response will be reported based on the uid in
the query message and whether it was for the signaling or bearer trunk.
•
For ASAI Event Reports, Avaya Communication Manager will report the Call ID and Trunk ID of
the SBS trunk. ASAI should provide the Trunk ID of the associated bearer trunk to the ASAI
Event Reports and Adjunct Route message.
1662
UCID that is currently transported or interworked over QSIG trunks
Administrator's Guide for Avaya Communication Manager
November 2003