Avaya Communication Manager Administrator's Manual page 815

Enhanced Mode Activation
If you enter this FAC when your system is a Basic multimedia complex, it will become an Enhanced
multimedia complex. If you enter this FAC when your system is an Enhanced mode station it will do
nothing.
Multimedia Call Access Code
If you enter this FAC from any voice station, it indicates to Avaya Communication Manager that you are
making an Enhanced mode multimedia call. If you originate a multimedia call with the multimedia call
access code, it will originate a call according to the Default Multimedia Parameters selected on the
Feature Related System Parameters screen.
Multimedia Data Conference Activation
If you enter this FAC from any voice station that is participating in a multimedia call, it will alert Avaya
Communication Manager that you want to enable data collaboration with the other parties on the call. If
you enter this FAC a second time, it will give denial treatment (since a collaboration session is already
active). This FAC only applies to voice stations on servers equipped with ESM adjuncts.
Multimedia Data Conference Deactivation
If you enter this FAC from the phone that enabled data collaboration on a multimedia mode call, it will
deactivate the data session and revert to a voice and video call. If a user enters this FAC while
participating in a data-collaboration multimedia call that the user did not initiate, the system responds
with denial treatment.
Multimedia Multi-Address Access Code
The multimedia multi-address access code is similar to the multimedia call access code. It allows
origination of a multimedia call from a voice station. It is used when the destination being dialed requires
a different address for each of the 2 B-channels. For example, ISDN-BRI provided by a Central Office is
provisioned with separate listed directory numbers for each B-channel. In order to make a 2B multimedia
call to such a device, two sets of addresses must be entered.
Originating a multimedia call with the multimedia multi-address access code will originate a call
according to the Default Multimedia Parameters selected on the Feature-Related System-Parameters
screen.
Multimedia Parameter Access Code
This FAC can be entered by any voice station to indicate to Avaya Communication Manager that you
want to initiate a multimedia mode call with a specific bearer capability. This FAC would be followed by
a 1 or 2 to indicate the following parameter selections respectively: 2x64 (unrestricted initial system
default), 2x56 (restricted).
Administrator's Guide for Avaya Communication Manager
November 2003
Screen Reference
Feature Access Code
815