Avaya Communication Manager Administrator's Manual page 954

Screen Reference
IP Routing
Destination Node
The node name of the final destination for this connection.
Valid entries
The name previously entered on the
Node Names screen.
Gateway
The node name of the first intermediate node.
Valid entries
A name previously entered on the
Node Names screen and is either a
port on the CLAN circuit pack or is
identified as a Destination Node on
another IP route.
Metric
Valid entries
0 or 1
Network Bits
This field is a 32-bit binary number that divides the network ID and the host ID in an IP address.
Valid entries
0-32
954
Usage
Enter the name of the final destination node
of the IP route for this connection.
Usage
If there are one or more intermediate nodes,
the first intermediate node is the Gateway.
If there are no intermediate nodes between
the local and remote CLAN ports for this
connection, the Gateway is the local CLAN
port.
Usage
Enter 1 on a server that has more than one CLAN circuit pack
installed.
See Administration for Network Connectivity for Avaya
Communication Manager for more information.
Usage
Enter the number of Network Bits that corresponds to the
Subnet Mask for the IP Route. If you skip this field and enter
a Subnet Mask, the system automatically sets the
corresponding Network Bits value. For example, if you set
this field to 24, then the system sets the Subnet Mask field to
255.255.255.0.
Administrator's Guide for Avaya Communication Manager
November 2003