Avaya Communication Manager Administrator's Manual page 1127

DCS/QSIG Intw
This field only appears if the
screen is set to y.
Valid
entries
y/n
FRL
Valid
entries
0 to 7
!
SECURITY ALERT:
For system security reasons, Avaya recommends using the most restrictive FRL possible.
Grp No
Valid
entries
1 to 666
1 to 2000
Hop Lmt
Enter the number of hops for each preference. A hop is when a call tandems through a media server or
switch to another destination. Limiting the number of hops prevents circular hunting, which ties up trunk
facilities without ever completing the call. Avaya Communication Manager blocks a hop equal to or
greater than the number you enter.
Valid entries
blank
1 to 9
1 to 32
Administrator's Guide for Avaya Communication Manager
November 2003
Interworking with DCS
Usage
Enter y to enable DCS/QSIG Voice Mail Interworking.
Usage
Enter the Facility Restriction Level (FRL) associated with the entries
on this row (preference). 0 is the least restrictive and 7 is the most
restrictive. The calling party's FRL must be greater than or equal to
this FRL to access the associated trunk-group.
Usage
Enter the trunk group number associated with this row (preference).
For DEFINITY R, CSI, SI.
For S8300 Media Server, S8700 IP-Connect, S8700 Multi-Connect.
Usage
Indicates that there is no limit to the number of hops for this
preference.
To limit the number of hops if using the tandem hop feature.
If using the transit feature.
field on the System-Parameters Customer-Options
Screen Reference
Route Pattern
1127