Userrole - Dell S6100 Configuration Manual

Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.5(0.1)
9.5(0.0)
Example
Dell# show userroles
Role
netoperator
netadmin
secadmin
sysadmin
netoperator
testadmin
Related Commands
•

userrole

Create user roles for the role-based security model.
Syntax userrole name inherit existing-role-name
To delete a role name, use the no userrole name command. Note that the reserved role names may not be deleted.
Parameters
name
inherit existing-role-
name
Defaults none
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
Description
Introduced on the S6100-ON.
Introduced on the Z9100-ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the Z9000, S6000, S4820T, S4810, MXL.
Inheritance
netadmin
userrole — create user roles.
Enter a text string for the name of the user up to 63 characters. It cannot be one of the
system defined roles (sysadmin, secadmin, netadmin, netoperator).
Enter the inherit keyword then specify the system defined role to inherit permissions
from (sysadmin, secadmin, netadmin, netoperator).
Description
Introduced on the S6100-ON.
Modes
Exec
Exec Config Interface Line Router IP
Route-map Protocol MAC
Exec Config
Exec Config Interface Line Router IP
Route-map Protocol MAC
Exec Config Interface Line Router IP
Route-map Protocol MAC
Security 1471