Field
Instance
Sts
Guard Type
Example
Dell#show spanning-tree msti 5 guard
(Guard)
Interface
Name
------------------------------------
Gi 0/1
Gi 0/2
Gi 0/3
spanning-tree
Enable the multiple spanning tree protocol on the interface.
S4810
Syntax
spanning-tree
To disable the multiple spanning tree protocol on the interface, use the no
spanning-tree command.
Parameters
spanning-tree
Defaults
Enable.
Command
INTERFACE
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Multiple Spanning Tree Protocol (MSTP)
Description
MSTP instance.
Port state: root-inconsistent (INCON Root), forwarding
(FWD), listening (LIS), blocking (BLK), or shut down (EDS
Shut).
Type of STP guard configured (Root, Loop, or BPDU guard).
Instance
Sts Guard
5
INCON(Root)
5
FWD
5
EDS(Shut)
Enter the keywords spanning-tree to enable the MSTP on
the interface.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
type
Rootguard
Loopguard
Bpduguard
1129