Show Dot1X Interface - Dell S4810 Reference Manual

Hide thumbs Also See for S4810:

Table of Contents

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version 9.0.2.0

Version 8.3.11.1

Version 8.3.7.0

Version 7.6.1.0

Version 7.4.1.0

show dot1x interface

Display the 802.1X information on an interface.

show dot1x interface interface

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Introduced on the S6000.

Introduced on the S4820T.

Introduced on the Z9000.

Introduced on the S4810.

Introduced on the C-Series and S-Series.

Introduced on the E-Series.

Enter one of the following keywords and slot/port or number

information:

For a Gigabit Ethernet interface, enter the keyword

GigabitEthernet then the slot/port information.

For a Fast Ethernet interface, enter the keyword

FastEthernet then the slot/ port information.

For a ten-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet then the slot/port information.

For a 40-Gigabit Ethernet interface, enter the keyword

fortyGigE then the slot/port information.

EXEC privilege