Per-Port Qos Commands - Dell S4810 Reference Manual

Hide thumbs Also See for S4810:
Table of Contents

Advertisement

Version 8.3.11.1
Version 8.3.7.0
Version 8.3.1.0

Per-Port QoS Commands

Per-port QoS (port-based QoS) allows you to define the QoS configuration on a per-physical-port basis.
dot1p-priority
Assign a value to the IEEE 802.1p bits on the traffic this interface receives.
S4810
Syntax
dot1p-priority priority-value
To delete the IEEE 802.1p configuration on the interface, use the no dot1p-
priority command.
Parameters
priority-value
Defaults
none
Command
INTERFACE
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
1328
Introduced on the Z9000.
Introduced on the S4810.
Introduced.
Enter a value from 0 to 7.
dot1p
Queue Number
0
2
1
0
2
1
3
3
4
4
5
5
6
6
7
7
Introduced on the S6000.
Quality of Service (QoS)

Advertisement

Table of Contents
loading

Table of Contents