Dell S4810 Reference Manual page 988

Hide thumbs Also See for S4810:

Table of Contents

To delete a password, use the no isis password [password] [level-1 |

level-2] command.

No default password. level-1 (if not otherwise specified).

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version 9.0.2.0

Version 8.3.11.1

To protect your network from unauthorized access, use this command to prevent

unauthorized routers from forming adjacencies.

You can assign different passwords for different routing levels by using the

keywords level-1 and level-2.

The no form of this command disables the password for Level 1 or Level 2 routing,

using the respective keywords level-1 or level-2.

This password provides limited security as it is processed as plain text.

(OPTIONAL) Enter 7 to encrypt the password using DES.

(OPTIONAL) Enter the keywords hmac-md5 to encrypt the

password using MD5.

Assign the interface authentication password.

(OPTIONAL) Independently configures the authentication

password for Level 1. The router acts as a station router for

Level 1 routing. This setting is the default.

(OPTIONAL) Independently configures the authentication

password for Level 2. The router acts as an area router for

Level 2 routing.

Introduced on the S6000.

Introduced on the S4820T.

Introduced on the S4810.

Introduced on the Z9000.

Intermediate System to Intermediate System (IS-IS)