Forward-Delay - Dell S4810 Reference Manual

Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
Version 6.5.1.0
Related protocol spanning-tree mstp
Commands

forward-delay

The amount of time the interface waits in the Blocking State and the Learning State before transitioning
to the Forwarding State.
S4810
Syntax
forward-delay seconds
To return to the default setting, use the no forward-delay command.
Parameters
seconds
Defaults 15 seconds
Command MULTIPLE SPANNING TREE
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
1118
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced.
— enters MULTIPLE SPANNING TREE mode.
Enter the number of seconds the interface waits in the
Blocking State and the Learning State before transiting to the
Forwarding State. The range is from 4 to 30. The default is 15
seconds.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Multiple Spanning Tree Protocol (MSTP)