Dell S4810 Reference Manual page 868

Hide thumbs Also See for S4810:
Table of Contents

Advertisement

dest-mac | source-mac]} | {tcp-udp | ingress-port
[enable]}command.
Parameters
ip-selection
{dest-ip |
source-ip}
mac {dest-mac
| source-dest-
mac | source-
mac}
tcp-udp enable
ingress-port
enable
Defaults
IP 4-tuple (IP SA, IP DA, Source Port, Destination Port)
Command
CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
868
Enter the keywords to distribute IP traffic based on the
following criteria:
dest-ip — Uses destination IP address and destination
port fields to hash. The hashing mechanism returns a 3-
bit index indicating which port the packet should be
forwarded.
source-ip — Uses source IP address and source port
fields to hash. The hashing mechanism returns a 3-bit
index indicating which port the packet should be
forwarded.
Enter the keywords to distribute MAC traffic based on the
following criteria:
dest-mac — Uses the destination MAC address, VLAN,
Ethertype, source module ID and source port ID fields to
hash. The hashing mechanism returns a 3-bit index
indicating which port the packet should be forwarded.
source-dest-mac — Uses the destination and source
MAC address, VLAN, Ethertype, source module ID and
source port ID fields to hash. The hashing mechanism
returns a 3-bit index indicating which port the packet
should be forwarded.
source-mac — Uses the source MAC address, VLAN,
Ethertype, source module ID and source port ID fields to
hash. The hashing mechanism returns a 3-bit index
indicating which port the packet should be forwarded.
Enter the keywords to distribute traffic based on the
following:
enable — Takes the TCP/UDP source and destination
ports into consideration when doing hash computations.
This option is enabled by default.
Enter the keywords to distribute traffic based on the
following:
enable — Takes the source port into consideration when
doing hash computations. This option is disabled by
default.
IPv4 Routing

Advertisement

Table of Contents
loading

Table of Contents