Show Ip Ospf Database Opaque-Link - Dell S4810 Reference Manual

link-state-id
adv-router ip-
address
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.1
Related show ip ospf database
Commands

show ip ospf database opaque-link

Display the opaque-link (type 9) LSA information.
S4810
Syntax
show ip ospf [process-id | vrf vrf-name] database opaque-link
[link-state-id] [adv-router ip-address]
1204
(OPTIONAL) Specify LSA ID in dotted decimal format. The
LSA ID value depends on the LSA type, and it can be one of
the following:
• the network's IP address for Type 3 LSAs or Type 5 LSAs
• the router's OSPF router ID for Type 1 LSAs or Type 4
LSAs
• the default destination (0.0.0.0) for Type 5 LSAs
(OPTIONAL) Enter the keywords adv-router and the ip-
address to display only the LSA information about that
router.
EXEC
EXEC Privilege
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Added support for Multi-Process OSPF.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— displays OSPF database information.
Open Shortest Path First (OSPFv2 and OSPFv3)