Show Ip Pim Bsr-Router - Dell S4810 Reference Manual

show ip pim bsr-router

View information on the Bootstrap router.
S4810
Syntax
show ip pim bsr-router
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 8.1.1.0
Version 7.8.1.0
Example
E600-7-rpm0#show ip pim bsr-router
PIMv2 Bootstrap information
This system is the Bootstrap Router (v2)
This system is a candidate BSR
length: 30
show ip pim interface
View information on the interfaces with IP PIM enabled.
S4810
Syntax
show ip pim interface
Command
•
Modes
•
1284
EXEC
EXEC Privilege
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
BSR address: 7.7.7.7 (?)
Uptime: 16:59:06, BSR Priority: 0, Hash mask length: 30
Next bootstrap message in 00:00:08
Candidate BSR address: 7.7.7.7, priority: 0, hash mask
EXEC
EXEC Privilege
PIM-Sparse Mode (PIM-SM)