Show Ip Rip Database - Dell S4810 Reference Manual

show ip rip database

Display the routes that RIP learns. If the switch learned no RIP routes, no output is generated.
S4810
Syntax
show ip rip database [ip-address mask]
Parameters
ip-address
mask
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.6.1.0
pre-Version
6.2.1.1
Usage The following describes the show ip rip database command shown in the
Information following example.
Field
Total number of
routes in RIP
database
100.10.10.0/24
directly
connected
150.100.0.0
redistributed
209.9.16.0/24...
Routing Information Protocol (RIP)
(OPTIONAL) Specify an IP address in dotted decimal format
to view RIP information on that network only. If you enter an
IP address, also enter a mask for that IP address.
(OPTIONAL) Specify a mask, in /network format, for the IP
address.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Description
Displays the number of RIP routes stored in the RIP
database.
Lists the routes directly connected.
Lists the routes learned through redistribution.
Lists the routes and the sources advertising those routes.
1403