Ip Dhcp Snooping Database - Dell S4810 Reference Manual

ip ip-address
interface type
slot/port
lease time
Defaults none
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.5.1.0
Version 8.3.7.0
Version 7.8.1.0
Related show ip dhcp snooping
Commands

ip dhcp snooping database

Delay writing the binding table for a specified time.
S4810
Syntax
ip dhcp snooping database write-delay minutes
1524
Enter the keyword ip then the IP address that the server is
leasing.
Enter the keyword interface then the type of interface to
which the host is connected.
• For an 10/100 Ethernet interface, enter the keyword
fastethernet.
• For a ten-Gigabit Ethernet interface, enter the keyword
tengigabitethernet.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE.
Enter the slot and port number of the interface.
Enter the keyword lease then the amount of time the IP
address is leased. The range is from 1 to 4294967295.
EXEC
EXEC Privilege
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Added support for 4-port 40G line cards on ExaScale.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
— displays the contents of the DHCP binding table.
Security