Redistribute - Dell S4810 Reference Manual

Version 7.6.1.0
pre-Version
6.2.1.1
Usage Although the passive interface does not send or receive routing updates, the
Information network on that interface still includes in RIP updates sent using other interfaces.
Related
neighbor
Commands
network

redistribute

Redistribute information from other routing instances.
S4810
Syntax
redistribute {connected | static}
To disable redistribution, use the no redistribute {connected | static} command.
Parameters
connected
static
Defaults Not configured.
Command ROUTER RIP
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.6.1.0
1398
Introduced on the C-Series.
Introduced on the E-Series.
— enables RIP for a specified network.
— defines a neighbor.
Enter the keyword connected to specify that information
from active routes on interfaces is redistributed.
Enter the keyword static to specify that information from
static routes is redistributed.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Routing Information Protocol (RIP)