Related
class-map
Commands
show qos dot1p-queue-mapping
Displays the dot1p priority to queue mapping on the switch.
S4810
Syntax
show qos dot1p-queue-mapping
Defaults
•
•
Command
EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version
8.3.12.0
Related
service-class dot1p-mapping
Commands
show qos policy-map
View the QoS policy map information.
S4810
Syntax
show qos policy-map {summary [interface] | detail}
Parameters
summary
interface
Quality of Service (QoS)
— identifies the class map.
dot1p Priority: 0 1 2 3 4 5 6 7
Queue: 2 0 1 3 4 5 6 7
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
To view a policy map interface summary, enter the keyword
summary and optionally one of the following keywords and
slot/port or number information:
•
For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
•
For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
— Identifies the class map.
1359