Redistribute Isis - Dell S4810 Reference Manual

Version 7.8.1.0
Version 7.6.1.0
Version 7.5.1.0
Version 7.4.1.0
pre-Version
6.1.1.1

redistribute isis

Redistribute IS-IS routing information throughout the OSPF instance.
S4810
Syntax
redistribute isis [tag] [level-1 | level-1-2 | level-2] [metric
metric-value | metric-type type-value] [route-map map-name]
[tag tag-value]
To disable redistribution, use the no redistribute isis [tag] [level-1 |
level-1-2 | level-2] [metric metric-value | metric-type type-
value] [route-map map-name] [tag tag-value] command.
Parameters
tag
level-1
level-1-2
level-2
metric metric-
value
metric-type
type-value
route-map
map-name
tag tag-value
Defaults Not configured.
1184
Added support for Multi-Process OSPF.
Introduced on the S-Series.
Introduced on the C-Series.
Added the keyword default.
Introduced on the E-Series.
(OPTIONAL) Enter the name of the IS-IS routing process.
(OPTIONAL) Enter the keywords level-1 to redistribute
only IS-IS Level-1 routes.
(OPTIONAL) Enter the keywords level-1-2 to redistribute
both IS-IS Level-1 and Level-2 routes.
(OPTIONAL) Enter the keywords level-2 to redistribute
only IS-IS Level-2 routes.
(OPTIONAL) Enter the keyword metric then a number. The
range is from 0 (zero) to 4294967295.
(OPTIONAL) Enter the keywords metric-type then one of
the following:
• 1 = for OSPF External type 1
• 2 = for OSPF External type 2
(OPTIONAL) Enter the keywords route-map then the name
of the route map.
(OPTIONAL) Enter the keyword tag to set the tag for routes
redistributed into OSPF. The range is from 0 to 4294967295.
Open Shortest Path First (OSPFv2 and OSPFv3)