Advertise Management-Tlv - Dell S4810 Reference Manual

Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.7.1.0
Version 7.6.1.0
Version 7.4.1.0

advertise management-tlv

Advertise management TLVs (Type, Length, Value).
S4810
Syntax
advertise management-tlv {management-address | system-
capabilities | system-description | system-name}
To remove advertised management TLVs, use the no advertise management-
tlv {management-address | system-capabilities | system-
description | system-name} command.
Parameters
management-
address
system-
capabilities
system-
description
system-name
Defaults none
Command CONFIGURATION (conf-lldp)
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
1070
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Enter the keyword management-address to advertise the
management IP address TLVs to the LLDP peer.
Enter the keywords system-capabilities to advertise the
system capabilities TLVs to the LLDP peer.
Enter the keywords system-description to advertise the
system description TLVs to the LLDP peer.
Enter the keywords system-name to advertise the system
name TLVs to the LLDP peer.
Link Layer Discovery Protocol (LLDP)